Trilogy Touch Technology T3-HB15A1 User Manual

Page 9

Advertising
background image

Page 6

Brightness

Press the Brightness Button (3) when the Menu
is not displayed.

Contrast:

Press the Contrast Button (2) when the Menu is
not displayed.

Auto
Setting:

Press the Auto Button (5) when the Menu is not
displayed.

made in the “Settings” submenu.

Any changes made are automatically saved in the Monitor memory when the OSD disappears. Turning off the

power should be avoided while using the OSD, as this may not allow changes to be saved.

Adjustments for clock, phase and positions are saved for each signal timing or screen resolution. Except for

these adjustments, all other adjustments have only one setting that applies to all signal timing.

The submenu color will change from white to pink when the function is selected.

You can skip the OSD menu and display commonly used adjustment scales directly by using the following

button operations (refer to previous diagram for button locations):

The Auto Adjust process may take as much as 10 consecutive seconds. The display image will make noticeable

changes as the Auto Adjust function completes.

SELF-TEST CHECK:

This product provides a self-test ability, through which you can check whether the LCD monitor functions are working

properly. If your LCD monitor is properly connected, but there is no image showing and the power indicator light on the

Monitor displays orange, please follow the steps below:

1. Turn off both the computer and LCD monitor.

2. Unplug the video signal connector from the back of the computer.

3. Turn the LCD monitor on.

The monitor should display “No Signal Input” on the screen and the power LED indicator should be orange. If no

display is observed, there may be a problem with the Monitor.

Turn off the LCD monitor and reconnect the signal cable, then turn the computer and LCD monitor on. As the

computer boots, there should be a video display and the power LED should now be green. If the LED of the monitor is

an orange color after completing the steps above, please check your VGA card and computer system.

Advertising