Targus Screen Scroller Mouse - Manual (Page 3)

3
System Requirements
To use the mouse, your computer must meet the following
hardware requirements and run one of the operating systems
listed below.
Connecting the Mouse to Your
Computer
Depending on the operating system you are running, you can
connect the mouse to either your computer’s USB port or,
using the supplied PS/2 adapter, you can connect the mouse to
your computer’s PS/2 port.
Connecting the Mouse to the USB Port
NOTE: If you are running the Windows NT ® operating system,
you must connect the mouse to your computer’s PS/2 port.
See “Connecting the Mouse to the PS/2 Port.”
To connect the mouse to an available USB port:
1 Turn off your computer.
2 Plug the standard USB end of the cable into an available
USB port on your computer.
You are now ready to install the device drivers for your
operating system.
Hardware Operating System
• PC with a Intel ® Pentium ® processor
or equivalent and a hard disk drive
• Windows ® 98/Me/
2000/XP
• 64 MB RAM or higher, depending on
the operating system
• Windows NT ®
(PS/2 only)
• USB version 1.1 interface
or PS/2 port
• Mac OS X and higher
(USB only)