TANDBERG Codian MCU MSE 8420 - Manual (Page 13)

8
Configuring the Media blade
Step one: Log in to the Media blade
All administration of the Media blade is performed via the web interface.
To log in to the web interface of the Media blade:
1
Log in to the Supervisor’s web interface.
2 Go to
Hardware > Blades
and click the IP address of the Media blade.
3 Click
Log in
, and then click
Change log in
and enter the user name admin with
no password.
Step two: Using an H.323 gatekeeper or SIP registrar (optional)
If you have H.323 endpoints, using an H.323 gatekeeper can make it easier for
participants to call in to a conference. You can configure the Media blade to use an
external gatekeeper or its own built-in gatekeeper. For information about using the
built-in gatekeeper, refer to the online help.
If you have SIP endpoints, using a SIP registrar can make it easier for participants to
call in to a conference.
To configure the Media blade to use an H.323 gatekeeper:
1
In the web interface of the Media blade, go to
Settings > Gatekeeper
.
2 Enable
H.323 gatekeeper usage
and configure the settings you require, using
the online help for further assistance.
3 Click
Apply changes
.
To configure the Media blade to use a SIP registrar:
1
In the web interface, go to
Settings > SIP
.
2 Configure the settings you require, using the online help for further assistance.
3 Click
Apply changes
.
Codian recommends that you change the admin account to use a
password as soon as possible. To do that, go to
Users
, click the
admin
link, and provide the required user information.
Before you configure the Media blade to use, and register conferences to,
a SIP registrar, you must set up the Media blade and its conferences on
that SIP registrar.
i
i