TANDBERG Codian MCU MSE 8420 - Manual (Page 14)

Configuring the Media blade
9
Step three: Add endpoints (optional)
One way to add participants to a conference that you create is to have the Media
blade automatically call them when the conference starts. To do this, you configure
their endpoints on the Media blade. When you set up a conference, you can choose
the endpoints from the
Pre-configured participants
list. This is easier than entering
each endpoint’s details every time. Participants that are pre-configured for a
conference will automatically be called by the Media blade to join that conference.
To define pre-configured endpoints:
1
In the web interface of the Media blade, go to
Endpoints
:
To add a H.323 endpoint, click
Add H.323
To add a SIP endpoint, click
Add SIP
To add a VNC screen, click
Add VNC
2 Configure the endpoint settings you require, using the online help for further
assistance.
3 Click
Add endpoint
.