Trek 11i EN - Manual (Page 19)


CLK
TME
AVG
MAX
TRP
ODO
MH
Mode
Set
RESTART- gETTINg REAdy TO RIdE
Your computer stores data for two intervals- since last ReSet
and since last ReStart. ReSet sets ALL data to zero. ReStart sets
only the Trip data to zero.
The trip modes include
• TRP
• TME
• MAX
This operation sets all four values to zero, allowing the
computer to display information for a single ride.
To ReStart (set the Trip data to zero)
1. Cycle Mode to TRP (Figure 16).
2. Hold Set• , and do not let up until after
completing step 3.
3. Hold Mode .
The Max setting ReStarts at ‘0’.
reStart
CLK TME AVG MAX TRP AVG
MPH F
Figure 6- TrP screen