Teka HX-45.15 - Manual (Page 11)

10 Once it is the set time, the oven will turn
off, an alarm will sound and the and 13
symbols will flash.
11 Press on any sensor on the control panel
to stop the alarm.
If you wish to change the cooking stop time
while cooking is in progress, press on the
clock sensor until the symbol flashes.
You can then change the time by pressing on
the + or – sensors. The two beeps you hear
after that will confirm the new time has been
set.
Child Safety Function
This function locks the oven, preventing small
children from playing with it. To turn on the
function, press on the symbol until you hear
a long beep and see several flashing dots
between the digits of the temperature display
(10). The oven is now locked.
To turn off the child safety function, keep the
symbol pressed until a long beep sounds.
Caution
In the event of power failure, your electronic
clock timer settings will be erased and 12:00
will flash on the clock display. Reset the clock
and programme again.
4 Select a cooking function and temperature.
5 Once it is the set time, the oven will turn off,
an alarm will sound and the symbol will
flash more quickly.
6 Press on any sensor on the control panel to
stop the alarm.
You can change the programmed cooking stop
time at any moment by pressing on the clock
sensor until the symbol flashes and
then by pressing on the + or – sensors. The
two beeps you hear after that will confirm the
new time has been set.
You can use this function even if you are
already cooking with the oven. If this is the
case, follow all of the above instructions
except No. 4.
Programming Cooking Time and Cooking
Stop Time
1 1 Press on the clock sensor . The 12
symbol will light up.
1 2 Select the cooking time by pressing the +
or – sensors.
1 3 Two consecutive beeps will then sound,
and the display will show the remaining
cooking time. The symbol will flash
slowly.
1 4 Press on the clock sensor several times
until the symbol lights up.
1 5 Select the cooking stop time by pressing
the + or – sensors.
1 6 This will be confirmed by two beeps. The
current time will show on the display and
the symbol will remain lit.
1 7 Select a cooking function and temperature.
1 8 The oven will remain off with the symbol
lit and the symbol flashing slowly. The
clock will show the current time and the
inside light will remain off. The oven is now
programmed.
1 9 When it is time to star t cooking, the oven
will turn on and will operate for the
programmed cooking time. The clock
display will show the remaining cooking
time.
4 Once the programmed time has passed, an
alarm will sound and the symbol will
begin to flash more quickly.
5 Press on any sensor on the control panel to
stop the alarm.
You can change the programmed time at any
moment by pressing on the clock sensor
until the symbol flashes and then by
pressing on the + or – sensors. The two beeps
you hear after that will confirm the new time
has been set.
Programming Cooking Time
1 Press on the clock sensor .The T
symbol will light up.
2 Select the cooking time by pressing the
+ or – sensors.
3 Two consecutive beeps will then sound and
the display will show the remaining cooking
time. The symbol will flash slowly to
indicate that the oven will switch itself
automatically.
4 Select a cooking function and temperature.
5 Once the cooking time is complete, the oven
will turn off, an alarm will sound and the
symbol will flash more quickly.
6 Press on any sensor on the control panel to
stop the alarm.
You can change the programmed time at any
moment by pressing on the clock sensor
and then on the + or – sensors. The two
beeps you hear after that will confirm the new
time has been set.
Programming the Cooking Stop Time
1 Press on the clock sensor several times
until the symbol lights up.
2 Select the cooking stop time by pressing the
+ or – sensors.
3 Two consecutive beeps will then sound and
the display will show the remaining cooking
time. The symbol will flash slowly to
indicate that the oven will switch itself
automatically.
Oven Lighting
The oven light will turn on:
• When the oven door is open. If the door is not
closed after a certain time, the light will turn
off to reduce power consumption.
• When any cooking function is selected. The
light will turn off after a certain time.
If you wish to turn on the light during cooking,
press on the Inside Light sensor . If this
sensor is pressed for a longer time, the light will
stay on for the entire duration of cooking.
Electronic Clock Functions
Timer Alarm: An audible signal is produced at
the programmed time, even if the oven is not
being used.
Cooking Time: This function allows you to
programme cooking time length, after which
the oven will turn off automatically.
Cooking Stop Time: This function allows you to
programme the time for cooking to stop, after
which the oven will turn off automatically.
Cooking Time and Cooking Stop Time: This
function allows both cooking time length and
the stop time to be programmed. The oven
switches on automatically at the set time and
operates for the cooking time it has been
programmed for. It switches itself of f
automatically at the entered stop time.
Child Safety Function: This function locks the
oven, preventing small children from playing
with it.
Programming the Timer Alarm
1 Press on the clock sensor several times
until the symbol lights up.
2 Select the length of time after which you
want the alarm to sound by pressing on the
+ or – sensors.
3 The alarm will be confirmed by two beeps
and the display will show the remaining time
before the alarm sounds and the symbol
will flash slowly indicating that the timer has
been set.
21
ENGLISH
20