Thermador T24IR - Manual (Page 11)

11
Setting the
temperature
The temperature can be set from
35 ° F to 46 ° F (+2 ° C to +8 ° C).
We recommend a setting of 39 ° F
(+4 ° C).
The temperature can be changed
with the + buttons (warmer) or ć
(colder). The temperature can be
adjusted in 1 ° F (0.5 ° C) steps.
To adjust the required temperature:
q Activate the setup mode with
the A or " buttons.
The REFRIGERATOR symbol
is displayed.
q Set the required temperature
with the + (warmer) or ć (colder)
buttons.
i Depending on the model, the
appliance can also be switched
off or switched to VACATION
mode via the temperature
setting. When the highest
temperature has been reached,
OFF is displayed.
Super function
The Super function is ideal for the
rapid cooling of drinks and
refrigerating large quantities of food.
When the Super function is
activated, the appliance is cooled as
cold as possible to a preset
temperature set at the factory for
approx. 6 hours.
The function is activated by pressing
the SUPER button. 11.
The SUPER
$
symbol and the
Super temperature are displayed.
The function is ended:
- by pressing the SUPER button
again
- by activating the Eco function
- by activating the Vacation mode
- by activating the Sabbath mode
i After approx. 6 hours the
refrigerator automatically
switches back to the
temperature set before Super
function.
Setup mode
There are several menus for
adjusting the appliance functions to
individual requirements. These
adjustments can be made in SETUP
mode.
To activate setup mode:
q Press the SETUP button.
The first menu (temperature unit) is
displayed.
To switch to the next menu:
q Press the A or " button.
The next menu and the current
setting (usually On/Off) are
displayed.
To select between the different
setting options within one menu:
q Press the + or ć button.
i A modified setting is saved
when the next menu is selected
with the A or " button.
To end setup mode:
q Press the SETUP button.
All modified settings are saved.
i If no button is pressed within
12ăseconds, setup mode ends
automatically. All modified
settings are saved. The required
temperature is displayed again.