TAO PDA Phone - Manual (Page 33)

Using Phone Features 33
3.5 In-call Options
To put a call on hold
Your device notifies you when you have another incoming call, and gives you the choice of rejecting or
accepting the call. If you are already on a call and accept the new call, you can choose to switch between the
two callers, or set up a conference call between all three parties.
1. Tap Answer to take the second call, and put the first one on hold.
2. To end the second call and return to the first call, tap End or press END ( ) on the device.
To switch between two calls
• Press TALK ( ) on your device.
To set up a conference call
To set up a conference call, the second call must be an outgoing call.
1. Place the first call or take an incoming call.
2. Put the call on hold then dial a second number.
3. Press TALK ( ) on your device to join the two calls into a conference call.
Note Not all service providers support conference calling. Contact your service provider for details.
To turn on and off the Speakerphone
The built-in Speakerphone on your device allows you to talk hands-free or lets other people listen to the
conversation.
• During a call, tap Speaker On, or press and hold TALK ( ) until the speakerphone turns on. The
speakerphone icon ( ) appears in the title bar.
• To turn off the speakerphone, tap Speaker Off, or press and hold TALK ( ) again until the
speakerphone turns off.
Warning! To avoid damage to your hearing, do not hold your device against your ear when the Speakerphone is
turned on.
To mute a call
You can turn off the microphone during a call, so that you can hear the caller but the caller cannot hear you.
• During a call, tap Mute.
• When the microphone is turned off, the mute icon ( ) appears on the screen. Tap Unmute to turn on
the microphone again.