Trek 8i - Manual (Page 19)


CLK
TME
AVG
MAX
TRP
ODO
MH
Mode
Set
RESTART- gETTINg REAdy TO RIdE
Your computer stores data for two
intervals- since last ReSet and since last
ReStart. ReSet sets ALL data to zero.
ReStart sets only the Trip data to zero.
The trip modes include
• TRP
• TME
• MAX
This operation sets all four values to
zero, allowing the computer to display
information for a single ride.
To ReStart (set the Trip data to zero)
1. Cycle Mode to TRP (Figure 15).
2. Hold Set• , and do not let up until after completing step 3.
3. Hold Mode .
The Max setting ReStarts at ‘0’.
ReStart
MAX
MH
Figure 5- MAX screen