Trek 8i - Manual (Page 24)

22
CLK
TME
AVG
MAX
TRP
ODO
MH
Mode
Set
SETTINg CuSTOM WhEEl SIzE
The procedure is almost the same as the basic setup on pages
13-14, except instead of picking a wheel size from the menu,
you can program in a 4-digit number.
Selecting the custom value 4-digit number
There are two methods for
selecting the custom wheel size
value:
• Select a value from Table 3,
Custom wheel size codes.
• Do a rollout test to measure
the circumference of your wheel
(page 24).
To set the computer
1. Cycle Mode to TME.
2. Hold Set•
Wheel size appears.
For 8i,
Cycle Set• to the preferred Wheel Select icon for Wheel 1 or
Wheel 2, and Push Mode to select.
Setting Custom Wheel Size
Table 3- Custom wheel size codes
00 x 20 2086 26 x .5 200
00 x 23 2096 26 x .90 2045
00 x 25 205 26 x .95 2050
00 x 28 236 26 x 2.0 2055
00 x 32 255 26 x 2. 2068
00 x 35 268 26 x 2.2 205
00 x 38 280 Custom
0000 - 2999