Perreaux AVP1 User Manual

Page 6

Advertising
background image

6

This RED LED will light up when the
program during playback is PCM
digital encoded.

5 MUTE

Sound will be muted and the 2 and ½
digits display will blink when the remote
MUTE button has been pressed. Press
the MUTE button again to disable the
function.


6 DYNAMIC

RANGE

The Dynamic Range LED indicates
whether Dynamic Range Compression
is ON or OFF as selected using the
remote.

ON:
The indicator LED is illuminated
Green.
OFF:

The indicator LED is not

illuminated

7 TEST

The TEST LED indicates that the unit is
in test tone mode. Test mode can only
be selected by the remote.

8

STANDBY LIGHT
Standby light illuminates during Standby


REAR PANEL

IMPORTANT NOTE:
THE ANALOG INPUT / OUTPUT
SOCKETS ON THE REAR OF THE AVP1
ARE COLOUR CODED AND
CORRESPOND TO THE TABLE BELOW
(With the exception of Centre (CENT) and
Subwoofer (SUB.W) inputs/outputs.

Red

= Right Channel Input / Output

White = Left Channel Input / Output

Yellow = Video (composite) Input / Output

AUDIO ANALOG OUTPUTS


1

FRONT L and R AUDIO OUTPUT
Connect to a power amplifier to
drive the front left and right
speakers.


2

REAR L and R AUDIO OUTPUT
Connect to a power amplifier to
drive the rear left and right
speakers.

3

CENTRE AUDIO OUTPUT
Connect to a power amplifier to
drive the centre speaker.

4

SUBWOOFER AUDIO OUTPUT
Connect to a power amplifier for
driving a subwoofer.
In the case of using a subwoofer
with a built-in amplifier, connect the
Subwoofer Audio output of the
AVP1 to the “Line in” input of the
subwoofer.

5

VCR REC. L and R OUTPUT
Analog signal output for VCR
recording. Connects to a VCR’s
record inputs.

ANALOG AUDIO INPUTS

6

VCR AUDIO L and R INPUTS
Analog signal left and right channel
inputs. Connects to VCR’s audio
outputs.


7

AUX AUDIO L and R INPUT
Analog signal left and right channel
inputs can be connected to the

outputs of an AUXILIARY audio
device such a TV.

8

TAPE AUDIO L and R INPUT
Analog signal left and right channel
inputs can be connected to TAPE
RECORDER audio outputs.

9

CD AUDIO L and R INPUT
Analog signal left and right channel
inputs can be connected to a CD
player audio outputs.


DIGITAL AUDIO INPUTS

10

MD OPTICAL DIGITAL INPUT
Optical Digital Audio input.
Connected to a MD’s Optical Digital
Output.

11

VIDEO 1 COAXIAL DIGITAL
AUDIO INPUT
Coaxial Digital Audio input.
Connected to a A/V source digital
audio output such a DVD player.

12

VIDEO 2 COAXIAL DIGITAL
AUDIO INPUT
Coaxial Digital Audio input.
Connected to a A/V source digital
audio output such a DVD player.

13

VIDEO 3 COAXIAL DIGITAL
AUDIO INPUT
Coaxial Digital Audio input.
Connected to a A/V source digital
audio output such a DVD player.


VIDEO INPUTS

Advertising
This manual is related to the following products: