Toastmaster TLWTOB6 - Manual (Page 12)

11. 10. Lightwave Oven Use and Care Guide
Lightwave Oven Tips
◆ The Lightwave Oven has preset temperatures for each function to cook
frequently prepared foods. The temperature can not be adjusted.
◆ The Lightwave Oven has a 2 hour timer.
◆ The Operation Light on the Control Panel will be on while the
unit is plugged in.
◆ The oven will beep 5 times when the program is completed.
◆ The Lightwave Oven will automatically shut off once the timer has
reached 0. The Operation Light and Display Window will remain
illuminated while the unit is plugged in.
◆ The Lightwave oven may be shut off at anytime during any
function. To interrupt a function, press and hold the Start/Stop
button until the unit beeps and shuts off.
◆ The Heating Elements also function as an interior light. During all
functions, except the Broil Function, the Upper and Lower
Heating Elements will cycle on and off. During Broil Function,
only the top element will cycle on and off.
Operating Instructions
Preset Functions
NOTE: All of the functions, except for the toast function, are
programmed with a default time and temperature. The default time
may be changed by turning the Time/Toast Color Dial. No preheat
is necessary on any function.
1. Plug unit into a 120 V outlet. Place Wire Rack into desired Shelf
Position. Close the Glass Door. The Operation Light and the Display
Window will illuminate while the unit is plugged in.
2. Press the Function Button until the pointer is next to the desired
cooking function.
3. The default time will appear in the Display Window under the
Timer section. To change the time, turn Time/Toast Color Dial to
select the desired time. The time will go up or down by 1 minute at
a time. The maximum time is 120 minutes (2 hours).
Note: Some foods will cook up to 30% faster than the package time.
Set the timer for lesser time, check food and continue cooking if
necessary.
Operating Instructions (Cont.)
6. Remove any dust that may have accumulated during packaging,
simply wipe the Lightwave Oven exterior and interior with a clean,
damp cloth.
7. Do not use abrasive cleaners.
8. Do not put the Lightwave Oven cord or plug in water.
9. When you are ready to use the Lightwave Oven, plug the cord into
a 120V AC outlet. Close the Glass Door. The Operation Light and
the Display Window will illuminate while the unit is plugged in.
10. To eliminate any protective substance or oil that may have been
used for packing and shipping, select the Casserole Function by
pressing the Function Button until the arrow is pointing toward the
Casserole Function.
11. Set the Timer by turning the Time/Toast Color Dial until 15 min.
displays under Timer in the Display window.
12. Press the Start/Stop Button and the Lightwave Oven will begin the
Casserole Function process. A small amount of smoke and odor
may be detected. This is normal.
13. Condensation may build-up on the inside of the Glass Door, but
will evaporate during the Casserole Function.
14. The Lightwave Oven will beep when the Casserole Function is
complete.
15. Unplug oven and allow to cool completely before cleaning.
16. To avoid scratching, marring, or discoloration, do not store
anything on top of the Lightwave Oven during operation.
See User Maintenance Instructions. Unplug when not in use.
CAUTION: Appliance surfaces are hot during and after use.
CAUTION: Always wear protective, insulated oven mitts on hands when
touching hot Lightwave Oven or hot dishes and food or when inserting
or removing Wire Rack, Broil Inserts, Bake/Broil Pan and Crumb Tray.