Toshiba pmn - Manual (Page 29)

55 54
Digital Zoom ON/OFF
This function allows the digital zoom function to be set to ON or OFF.
When ON, pressing the “T” button will first cause the lens to zoom to
its maximum optical telephoto setting; when pressed again, the digital
zoom function will operate to further extend the telephoto range (see
page 28). When disabled, only the optical zoom function will operate.
<Operation>
1 Press the “MENU” button.
2 Press the “ %” or “fi” button to
select [DIGITAL ZOOM].
3 Press the “ #” or “ ” button.
4 Use the “ %” or “fi” button to
select [OFF] or [ON].
5 Press the “ @” button (or “ ”
button) to complete the setting.
6 Press “MENU” button twice to
turn off the menu display.
7 Press the shutter release
button to take a picture.
Setting the REC Review
<Operation>
1 Press the “MENU” button.
2 Press the “ #” button to select
[ ], then press the “ ”
button.
3 Press “ %” or “fi” button to
select [REC REVIEW], then
press the “
#” or “ ” button.
4 Select [OFF] or [ON] using “ %”
or “ fi” button.
5 Press “ #” or “ ” to finish the
setting.
6 Press “MENU” button twice.
[SETTING DETALIS] menu will
disappear.
7 Press the shutter release
button to take a picture.
¶ In [REC REVIEW] mode, the interval
between the time a picture had been
taken and the next time you can take
another picture will become longer.
In [REC REVIEW] mode, you can display the picture for 2 seconds
immediately after you have taken it.
Initial Setting : Press the shutter release button = The LCD monitor
becomes dark = The viewfinder screen appears again
REC review mode : Press the shutter release button = The LCD
monitor becomes dark = The picture you have just taken appears =
The viewfinder screen appears again