Telular SX6P GSM - Manual (Page 9)

Phonecell ® SX6P GSM 3 User Manual
Wall-Mounting
1. Remove the mounting clip from the cradle and re-insert it with the tab pointing up - see
Figures 7 and 8.
2. Mark two hole locations 83 mm (3-1/4 inches) vertically apart and drill two holes into the wall.
3. Install the screws (not supplied) into the wall, leaving a gap of approximately 3 mm
(1/8 inches) between the screw head and the wall.
6. Align the mounting holes with the screws and mount the SX6P onto the screws - see Figures
9 and 10.
Insert
Mounting
Clip into
the Cradle
(tab up)
Mounting Clip in
Cradle (tab up)
Figure 8 – Handset mounting clip for wall-mount.
Remove
Mounting Clip
from the Cradle
(tab down)
Figure 7 – Handset mounting clip assembly.
Figure 10 – Mount the SX6P onto the screws.
83 mm (3-1/4 inches)
Figure 9 – SX6P mounting hooks.
Mounting
Holes