Telos Zephyr Xstream - Manual (Page 87)

USER’S MANUAL
Section 4: BASIC OPERATION & INSTALLATION 75
2. Press the <AUTO> key. Choose the Location Setup to be entered. Note: You
can edit an existing setup by selecting it.
To choose a Location Setup you have two options:
• Press and hold the < 6> to scroll to the list of 30 Location Setups (these
are setups # 100 to 130).
• Use the Keypad to enter the three‐digit number for the desired setup.
That setup will be displayed and will be highlighted.
3. Once the desired setup is highlighted, press the <SEL> button to allow entry
of (or editing of) the information for this setup. If an empty setup was
selected, "Unused Entry" will be displayed (see below):
4. Press <SEL> to continue to the screen shown below:
or press < 5> and then <SEL> to escape without changing.
5. Enter a name (see the beginning of this chapter section for an example on
how to select and enter information).
6. You can choose whether to Include Audio settings or not, by selecting this
menu selection. The choices are Tel (no Audio menu information included
with this Location setup) or Tel. & Audio.
If Tel is selected the system will include the current settings in the TEL Menu
with this setup. Each time this setup is activated, the system will reset the
TEL Menu items to these setting before dialing the number(s) for this setup.
If Tel. & Codec was selected the AUDIO settings will also be changed when
this setup is activated.