Top Innovations SP-403 - Manual (Page 14)

START TO SEW—HANDHELD OPERATION
x Insert four AA batteries or use bonus AC
adapter.
x Open dust cover.
x Raise needle to highest position by turn-
ing hand wheel counterclockwise.
x Move presser foot lift lever up to raise
presser foot.
x Place fabric under presser foot.
x Draw both the needle thread (top) and
the bobbin thread (bottom) 2-3 in. to the
left.
x Move presser foot lift lever down to
lower presser foot.
x Close dust cover.
x Press and hold the on/off switch.
x Guide fabric gently while sewing
x At the end of the seam, move presser
foot lift lever up to raise presser foot.
x Pull threads 2-3 in. forward, then cut.
11