Top Innovations SP-403 - Manual (Page 9)

THREADING THE MACHINE
x
Place spool of thread onto spool pin.
x
Press spool holder ring against spool.
CAUTION: Spool of thread should be ro-
tated freely after pressing the holder ring
on.
x
Pull thread to Guidepost (1) and draw it
to left, under pretension stud (2).
x
Draw thread between two tension discs
and then pull to right as shown.
x
Follow arrows, guide thread into take-up
lever eyelet (3) and then backwards to
wire loop (4).
x
Top view of threading.
x
Slip thread through (5).
x
Insert needle threader through needle
eye and pull thread through needle eye.
x
Pull thread 2-3 inches to the front.
8