Specifications, Hardwired models) – Tripp Lite APS PowerVerter User Manual
Page 15
15
Specifications
(Hardwired Models)
HARDWIRED MODELS:
APS 2012
APS2424
Weight:
38.0 lbs.
41.0 lbs.
INVERTER
Continuous power (@ 20° C):
2000 W
2400 W
Surge power (5 seconds):
4000 W
4800 W
Efficiency (Full Load):
90%
90%
Minimum DC Fuse Rating:
500A
300A
DC Input Current @ Nominal V DC
Full Load
192 A
112 A
No Load
2.5 A*
1.5 A*
Nominal Input Volts:
12 VDC
24 VDC
DC Input Voltage Range:
10-15 VDC
20-30 VDC
Nominal Output Volts:
120 VAC ±5%
120 VAC ±5%
Nominal Output Frequency:
60 Hz ±.3%
60 Hz ±.3%
BATTERY CHARGER
Charging Capacity DC:
60 A
30 A
Maximum Cable Length
1 ft.
3 ft.
Acceptance Volts VDC:
Selectable
Selectable
14.4 V**/14.2 V Wet**/Gel
28.8 V**/28.4 V Wet**/Gel
Float Volts VDC (w/gel):
13.3 V (13.6 V)
26.6 V (27.2 V)
Input Voltage AC:
120 V
120 V
Input Current AC:
16 A
16 A
LINE VAC OPERATION
Minimum Input AC Volts:
Selectable 75**,85, 95, or 105 VAC Selectable 75**,85, 95, or 105 VAC
Maximum Input AC Volts
(Continuous, Charger at Maximum):
Selectable 135** or 145 VAC
Selectable 135** or 145 VAC
Maximum Input Current
(Continuous, Charger at Maximum):
32 A
36 A
Input Frequency:
60 Hz ±10%
60 Hz ±10%
Maximum Output AC (Continuous)
16.7 A
20 A
Automatic Transfer Time:
4-6 ms
4-6 ms
HARDWIRED MODELS (Cont.):
APS 2448
APS3636VR
Weight:
38.0 lbs.
56.9 lbs.
INVERTER
Continuous power (@ 20° C):
2400 W
3600 W
Surge power (5 seconds):
4800 W
7200 W
Efficiency (Full Load):
90%
89%
Minimum DC Fuse Rating:
300A
300A
DC Input Current @ Nominal V DC
Full Load
56 A
114 A
No Load
1.5 A*
1.7 A*
Nominal Input Volts:
48 VDC
36 VDC
DC Input Voltage Range:
40-60 VDC
30-45 VDC
Nominal Output Volts:
120 VAC ±5%
120 VAC ±5%
Nominal Output Frequency:
60 Hz ±.3%
60 Hz ±.3%
BATTERY CHARGER
Charging Capacity DC:
15 A
30 A
Maximum Cable Length
12 ft.
4.5 ft.
Acceptance Volts VDC:
Selectable
Selectable
57.6 V**/56.8 V Wet**/Gel
43.2 V**/42.6 V Wet**/Gel
Float Volts VDC (w/gel):
53.2 V (54.4 V)
39.9 V (40.8 V)
Input Voltage AC:
120 V
120 V
Input Current AC:
16 A
24 A
LINE VAC OPERATION
Minimum Input AC Volts:
Selectable 75**,85, 95, or 105 VAC Selectable 75**,85, 95, or 105 VAC
Maximum Input AC Volts
(Continuous, Charger at Maximum):
Selectable 135** or 145 VAC
Selectable 135** or 145 VAC
Maximum Input Current
(Continuous, Charger at Maximum):
33 A
54 A***
Input Frequency:
60 Hz ±10%
60 Hz ±10%
Maximum Output AC (Continuous)
20 A
30 A
Automatic Transfer Time:
4-6 ms
4-6 ms
*Load sense can reduce this to 1/30 of the listed current. **Factory default setting. ***When AVR is boosting incoming current.
200103046 120V APS MV-cabinetEn-Sp 93-1911.qxd 7/2/01 10:18 AM Page 15