Co line access codes, Appendix a – access codes, Access codes – Toshiba Strata DK User Manual
Page 119
Strata DK Electronic Telephone 5/00
107
Access Codes
A
This appendix contains access codes for outside Speed Dial (SD) numbers, CO lines,
Paging Group and Paging Zone Codes.
CO Line Access Codes
CO lines are used when you dial an outside number. If your telephone does not have a
&2
button, you can enter the appropriate code listed in
to access
an outside line.
You can also store the code on a
6'
button for one-touch access. If you are storing a
CO Line access code onto a Speed Dial code, enter
before the CO access code
(e.g., to store code
, enter
).
In some systems,
is used as a general group code or to access Least Cost Routing
(LCR). System users are required to dial
in order to access an outside line. If you
press
in a system programmed with LCR, you may not hear internal dial tone,
depending on system programming.
See your System Administrator for the code which applies to your telephone.
➤
To access a line
➤
Press [PDN] + CO Line Access Code.