Call transfer with camp-on – Toshiba Strata DK User Manual

Page 49

Advertising
background image

Features

Call Transfer with Camp-on

Strata DK Electronic Telephone 5/00

37

Call Transfer with Camp-on

You can transfer calls to idle or busy [DNs], Hunt Group Numbers, ACD Group
[DNs], etc. You cannot transfer (or camp-on) to a station [PDN] or [PhDN] if the
station is in the DND mode, unless the station [PDN] or [PhDN] appears on other
stations.

1. Press

&21)7516

.

The CO or [DN] LED flashes (conference rate). You
hear internal dial tone.

2. Dial the [DN] where

the call is be
transferred.

The CO Line rings the called station. If you hear a
single tone, you can then announce the call over the
called telephone’s speaker. (If you hear ringing tone,
the call was made with Tone Signaling.)

3. Announce the call

and hang up if the
station is idle

...or if the station is
busy or does not
answer, hang up

The CO LED flashes (on-hold). If you transferred the
call from a [DN], the [DN]’s LED turns off. The CO
Line or [DN] camps onto the called station and the
called station receives a warning tone. The camped-on
call rings when you hang up.

...or to reconnect to
the transferred line
before it is answered,
press the flashing

&2

or [DN] +



.

The CO LED is a steady red
when the called station
answers the transferred call.

If the call is not answered
after a specified Recall time
set in system programming,
Camp-on is cancelled. The transferred call returns to
your station if your station or [DN] is idle, sends a
two-tone burst if your telephone is busy.

The LCD shows the CO Line number and the station
number (

203

) where it was originally transferred.

NO. 204

CAMP-ON 4

HOLD LINE 2
LN

2 RECALL 203

Advertising