TP-Link TL-R460 - Manual (Page 34)

TL-R460 Cable/DSL Router User Guide
Figure 5-23 Add or Modify a Domain Filtering entry
To add or modify a Domain Filtering entry, follow these instructions:
1. Effective Time - Enter a range of time in HHMM format, which point to the range
time for the entry to take effect. For example, 0803 - 1705, the entry will take effect
from 08:03 to 17:05.
2. Domain Name - Type the domain or key word as desired in the field. A blank in the
domain field means all websites on the Internet. For example:
www.xxyy.com.cn , .net.
3. Status - Select Enabled or Disabled for this entry on the Status pull-down list.
4. Click
the Save button to save this entry.
To add additional entries, repeat steps 1-4.
When finished, click the Return button to return to the Domain filtering page.
To Modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click
Modify or Delete as desired on the Edit column.
Click the Enable All button to enable all entries.
Click the Disable All button to disable all entries.
Click the Delete All button to delete all entries
Click the Next button to go to the next page and the Previous button to return to the
previous page.
For example: if you want to block the PCs on your LAN from accessing websites
www.xxyy.com.cn , www.aabbcc.com and websites with .net at the end on the Internet
while no limit for other websites. First, enable the Firewall and Domain Filtering on the
Firewall page, then, specify the following Domain filtering list:
- 30 -