TP-Link TL-R460 User Manual
Page 51
Advertising
TL-R460
Cable/DSL Router User Guide
window that appears. An example is shown in the following figure:
Figure B-3 Configuration tab
3) Click
on Properties. The following TCP/IP Properties window will display and
the IP Address tab is open on this window by default.
4) Now you have two ways to configure the TCP/IP protocol below:
• Assigned by DHCP Sever
a. Select
Obtain an IP address automatically
, as shown in the figure below:
Figure B-4 IP Address tab
b. Do not type anything into the New gateway field on the Gateway tab.
- 47 -
Advertising