Technicolor - Thomson TM9235 EN - Manual (Page 5)

EN
Before You Begin
Useful Advice
• Do not use your system immediately after
transporting it from a cold place to a warm
place, as condensation may cause the system
to malfunction. If moisture forms inside this
system, it may not operate properly. To
correct the problem, turn off the power and
wait about 30 minutes for moisture to
evaporate.
• This system is fitted with a laser. To avoid
accidents, it is to be opened by qualified
technicians only.
• Never leave the tray open as dust could
cover the laser lens and/or the tray could be
bumped into accidentally.
• Do not place the system near wet areas such
as bathrooms and pool side. Avoid storing
the system at humid places or near
abnormally heated areas.
• Power is continuously supplied to the
system. To disconnect power completely,
unplug the power cord from the power
outlet.
2
• Ensure minimum distance around the
apparatus for sufficient ventilation.The
ventilation should not be impeded by
covering the ventilation openings with
items, such as newspaper, etc.
• No naked flame source, such as lighted
candles, should be placed on the apparatus.
• Attention should be paid to enviornment
aspects of battery disposal.
AC Power
Plug the power supply cord into the AC power
jack on the back of the unit, and into an AC
power supply outlet that accepts the plug
supplied with your unit.
TM9235 EN 12/10/04, 10:32 AM 6