T-Fal 5252 - Manual (Page 11)

8
Eng
Changing the grill setting before confirming the programming:
• The cooking time has been set and is shown blinking on the
display.
• Press the “TEMP” button. Pilot light in the “TEMP” button
appears. The display will show the current grill setting.
• If it shows “HI”, press “-” to select “LO” and vice versa.
• The display will blink.
• Press “START”. The appliance will beep and cooking will start.
Changing the grill setting during cooking:
• The cooking time is counting down.
• Press the “TEMP” button; pilot light in the “TEMP” button
appears. The current grill setting will be displayed.
• Cooking continues.
• If it shows “HI”, press “-” to select “LO” and vice versa.
• The display will blink.
• Press the “TEMP” button again to enter the temperature in the
system.
• The display will again show the remaining cooking time.
Changing the time during cooking:
• The cooking time is counting down.
• Press the “TIME” button; pilot light in the “TIME” button
appears. The time display will start to blink.
• Cooking continues.
• Adjust the cooking time as desired by pressing the “+” or “-”
buttons.
• Press the “TIME” button again to enter the new time in the
system.
• The display will again show the remaining cooking time.