T-Fal 5252 - Manual (Page 8)

5
Eng
BAKE
(the two heating elements operate with temperature control)
To cook all your dishes:
• Place your dishes in the main oven at the desired height.
• Close the door.
Select the temperature:
• Press the “BAKE” button. Pilot light in the “BAKE” button
appears.
• The default temperature of “350°F” will be shown blinking on the
display.
• Press the “+” or “-” buttons to select your temperature. The
temperature can be changed in 25°F increments.
• The display will continue to blink.
Select the cooking time:
• Press the “TIME” button. Pilot light in the “TIME” button
appears. In so doing, the temperature setting is entered in the
system.
• The default setting of “0:30” (30 minutes) will appear blinking on
the display.
• Adjust the cooking time according to your recipe by pressing
the “+” or “-” buttons.
• Press “START”. The appliance will beep and cooking will start.
• The time will be counted down in one-minute intervals.
• At the end of the cooking time, the appliance will beep three
times and cooking will stop.
• You can stop the cooking at any time by pressing the “STOP”
button.
Changing the temperature before confirming the programming:
• After setting the cooking time, press the “TEMP” button. Pilot
light in the “TEMP” button appears.
• The temperature already selected is shown blinking on the
display.
• Press the “+” or “-” buttons to select the new temperature.
• The display will continue to blink.
• Press “START”; the appliance will beep and cooking will start.