Channel set-up, Initial set-up – Technicolor - Thomson 42PB120S4 User Manual
Page 10
Channel set-up
EN
10
Initial set-up
The initial set-up involves setting all the parameters required to be able
to search and store all the channels you can receive in your area. Make
sure that the TV set is switched on and follow steps 1 to 4.When you
first switch the TV set on, the language selection menu appears. If this
does not happen, refer to the Manual installation section to find out
how to carry out an automatic search.
1.
Choose which language you want the menus to appear in using the
buttons. Press
OK
to confirm.
2.
A list of countries appears. Select the relevant country using the
buttons. If your country is not listed, select Other. Press
OK
to confirm.
Note: This is the country you are in, or the country whose channels you want to receive
if you live near its borders.
3.
The AUTO INSTALLATION menu appears.The Start line is
selected. Press
OK
to launch the auto installation. Once the auto
installation has started, additional information displays (standard
currently scanned, frequency, and number of channels found).
The automatic set-up process can take several minutes. Channels
are arranged in a pre-set order, depending on the country selected.
If you press the
EXIT
button before the end of the process, the
channels already found are stored.
English
Français
Deutsch
Italiano
Español
- ok
COUNTRY
Return
U.K.
Eire
France
Germany
Italy
Spain
Belgium
Switzerland
Austria
Other
Select your country and press OK.
AUTO INSTALLATION
Return
Start
...
To start auto installation, press OK.
42pb120S4-en 2/07/04 11:32 Page 10