Technicolor - Thomson 42PB120S4 - Manual (Page 16)

Picture in picture (PIP)
EN
16
The PIP area on the remote control is used for the PIP functions.These
functions allow to view two programmes (one TV channel and one AV
programme, or two AV programmes) at the same time in various
ways.Press the
PIP button to scroll the various display modes:
PIP: a TV channel or AV programme is displayed in a frame in a corner
of the screen.
PAP: the screen is divided vertically in two and the second programme
is displayed on the right side. Sound comes from the main programme,
on the left.
PAP (4/3): the images are displayed in 4:3 format. Black bars are added
on the upper and lower parts of the screen.
PAP (16/9): the images are displayed in 16:9 format. Black bars are added
on the upper and lower parts of the screen.
Off: the function is deactivated.
Note: The PIP function is only available in TV mode and with devices connected to the
SCART, S-video, and Component 1H Y/Cb/Cr sockets.
Use the PIP+/PIP- buttons to change the PIP programme.
Use the PR+/- buttons to change the main programme.
Use the SWAP / button to swap the main programme and the PIP
programme.
Use the ZOOM / button to change the position of the PIP on the
screen (upper right, upper left, bottom left or bottom right).
Note: This function is only available if you selected the PIP mode.
Press the EXIT button to deactivate the PIP function.
42pb120S4-en 2/07/04 11:32 Page 16