TP-Link TL-R4299G - Manual (Page 37)

TL-R4299G Dual-WAN SMB Broadband Router User Guide
31
Enabled.
¾ Flow Control - This displays whether the Flow Control is Enabled, "Enabled" means the
function is enabled, "Disabled" means the function is't enabled.
¾ Negotiation Mode - The options are: Auto Negotiation, 10M Half Duplex, 10M Full
Duplex,100M Half Duplex,100M Full Duplex.
¾ Ingress Limit Mode & Ingress Limit Speed - Select the limit mode and limit speed for the
WAN ports.
¾ Egress Limit & Egress Limit speed - Enable Egress Limit for WAN ports and select the limit
speed for them.
)
Note:
Egress speed limit is designed for controlling the broadcasting storm. When the current flux
oversteps the setting value, the overstepped datagrams will be discarded.
4.4 DHCP
Choose menu “DHCP”, you can see the submenus under the main menu: DHCP Settings, DHCP
Clients List and Address Reservation.
Figure 4-17
Click any of them, and you will be able to configure the corresponding function. The detailed
explanations for each submenu are provided below.
4.4.1 DHCP Settings
Choose menu “DHCP→DHCP Settings”, you can configure the DHCP in the next screen (shown
in Figure 4-18).
The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which
provides the TCP/IP configuration for all the PCs that are connected to the router on the LAN.