TP-Link TL-R4299G - Manual (Page 38)

TL-R4299G Dual-WAN SMB Broadband Router User Guide
32
Figure 4-18
¾ DHCP Server - Enable or disable the DHCP server. If you disable the Server, you must
have another DHCP server within your network or else you must manually configure the
computer.
¾ Start IP Address - This field specifies the first address in the IP address pool. The default
address is 192.168.1.100.
¾ End IP Address - This field specifies the end address in the IP address pool. The default
address is 192.168.1.199.
¾ Address Lease Time - This is the amount of time in which a network user will be allowed
connection to the router with their current dynamic IP address. Enter the amount of time (in
minutes), the range of the time is 1 ~ 2880 minutes. The default value is 120 minutes.
¾ Default Gateway - Suggest to input the IP address of the LAN port of the router, default
value is 192.168.1.1. (Optional)
¾ Default Domain - Input the domain name of your network. (Optional)
¾ Primary DNS - Input the DNS IP address provided by your ISP. You can consult your ISP
for it. (Optional)
¾ Secondary DNS - Input the IP address of another DNS server if your ISP provides two DNS
servers. (Optional)
) Note:
To use the DHCP server function of the router, you must configure all computers on the LAN as
"Obtain an IP Address automatically" mode. This function will take effect until the router reboots.
4.4.2 DHCP Clients List
Choose menu “DHCP→DHCP Clients List”, you can view the information about the clients
attached to the router in the next screen (shown in Figure 4-19). Click the Refresh button to