Tripp Lite NETCOMMANDERTM B072-016-1 - Manual (Page 14)

14
Operation
(continued)
There are three different access levels. These are:
• Y - Full access to a particular computer. Plus access to the F4, F5 and F6 OSD functions
• V -View access only, to a particular computer (No keyboard/mouse functionality)
• N - No access to a particular computer - A TIMEOUT label appears if access is attempted
To give each user the desired access level:
1. Navigate to the desired computer line and User.
2. Toggle between the options using the Space bar.
Security
Go to the Security line in the Settings window and press [Enter]. The Security settings
window appears (see Figure 15).
Figure 15 The Security settings window
The “T” column on the right hand side refers to the Type of password.
There can only be 1 Administrator password, 1 Supervisor password, and 6 User passwords.
To change a user name or password:
1. Move to the desired line and column.
2. Type a new user name / password. User authentication is done solely via the password,
there is no security significance to the names.
The factory default setting for the User Profile Settings is full access.
OSD HELP Window (F1)
To access the HELP window press [F1]. The HELP window is displayed (see Figure 16).
Figure 16 The HELP window
Please note! All the functions in the Help window are performed from the Main window. The
Help window is only a reminder of the hotkeys and their functions.
200512060 93-2520 B072 series OM.qxd 3/6/2006 11:17 AM Page 14