Tripp Lite NETCOMMANDERTM B072-016-1 - Manual (Page 16)

16
Software
With the NetCommander KVM Update software program you can upgrade the firmware for
the:
• OSD
• Manager
• Server Interface Units
KVM Update enables you to add new features and take advantage of product improvements
in a quick and efficient manner.
You can install the KVM Switch Update on any computer, even one not part of the KVM
system.
Upgrading the KVM Firmware
• Pentium 166 or higher with 16MB RAM and 10MB free Hard Drive space
• Free Serial port
• Windows 98 and later
To update the firmware the KVM system must be connected and switched on
To run the software, connect the RS232 Serial cable to the computer containing the software,
and to the KVM Switch.
Connecting the RS232 Serial Cable
To install the KVM Switch Update software:
1. Download KVM update software from www.tripplite.com
2. Run the software.
Installing the Software
System Requirements
200512060 93-2520 B072 series OM.qxd 3/6/2006 11:17 AM Page 16