Technicolor - Thomson DTH8640 - Manual (Page 20)

20
Playing a disc
Subtitle and dialogue language
Select the subtitle or dialogue language if they are available on the disc.The
name of the language selected appears under the banner.
Note: selecting the language of subtitles only involves the disc being played. If you
remove the disc or if you switch off the DVD recorder your selection will be cancelled.
In this case the default language, chosen when your DVD recorder was first installed,
will be reactivated. If the preferred language is not available on the DVD disc the
preferred language of the disc (default language) will be selected automatically. With
some discs you can only access the dialogue or subtitle languages through the menu
provided on the disc.
Disc play mode
The DVD recorder has several play modes that depend on the type of disc
being played: standard play respects the order of the titles and chapters on
the disc; repeat between 2 points or repeat a disc, a title.The icon of the play
mode is accessible via the information banner during playback.
Repetition between 2 points A and B
A-B Repeat mode allows you to select exactly the sequence you wish to repeat.
1. Select A-B repeat mode and confirm to store the start of the sequence you wish to repeat.
2. Wait a few seconds before pressing OK again to mark the end of the scene to be repeated
(point B).To stop repeat, select another mode using the
▲
or
▼
keys, or by pressing STOP .
Note: repeat functions remain active until you turn them off, open the disc tray or turn off the power. Repeat
play only works with discs that show the elapsed time on the display. This may not work correctly with
certain discs (Video CDs in PBC mode).
Play modes
Selecting the
subtitle language
Selecting the
dialogue language
02_DTH8640_50_en.qxp 17/02/06 10:55 Page 20