Technicolor - Thomson DTH8640 - Manual (Page 3)

Automatic channel search
1. Turn on your TV set.
2. Press the recorder’s ON/STANDBY key once.Wait a few seconds
until the language menu appears. If this menu is not displayed, after
a few seconds on your TV screen select the AV socket to which
you connected your recorder.
3. Select a language with the , , OK keys.
The language selection determines the language of the recorder’s menus, but
also the language for the dialogues and subtitles on DVD discs if the language
selected is also offered by the discs being played.
4. Select your country of residence then the installation method using
the
, , OK keys.
The channel set-up begins. Wait until the end of the channel search and
continue set-up according to the indications which appear on the screen for
the different steps.
3
EN EN
SCART IN (VCR/DECODER)
SCART OUT (TV)
DIGITAL AUDIO OUT
Connections and initial set up
United Kingdom
Ireland
Europe
220 - 240 V
50 Hz
02_DTH8640_50_en.qxp 17/02/06 10:55 Page 3