Telular SX6P User Manual

Page 11

Advertising
background image

RUIM Usage (RUIM Models Only)

Your service provider may require you to install a RUIM in your SX6P for it to operate normally (see
RUIM Card Installation (page 1) for details). Without a RUIM, these SX6P models will reject incom-
ing calls and allow only emergency outgoing calls.

Once a RUIM-using SX6P is operating normally, you can use it to set its RUIM to require a PIN, not
require a PIN, or change the existing PIN. See Security (page 20) for details.

Starting Your SX6P with a RUIM PIN

If your RUIM requires a PIN (Personal Identification Number, also called Cardholder Verification, or
CHV), follow these steps:

1. Power on your SX6P.
2. The SX6P will prompt you to enter your PIN. Enter the PIN for your RUIM, then press STO.
3. If you enter the wrong PIN, the SX6P will display an error message and ask you to reenter the

PIN.

4. Entering an incorrect PIN three times will cause the SX6P to block the inserted RUIM. If your

RUIM is blocked due to incorrect PIN use, it will prompt you to enter the unblocking code. You
must contact your service provider to obtain this unblocking code. Do not guess at the block
code or use your own PIN to attempt to unblock the SX6; entering wrong codes will eventually
cause the RUIM to become permanently blocked.

5. If you are unable to enter the correct PIN for the inserted RUIM, the SX6P will not operate

normally. It will reject incoming calls and permit only emergency outgoing calls.

Starting Your SX6P if Your RUIM Requires No PIN

Power on your SX6P. No additional steps are necessary.

Starting Your SX6P if it is Bonded to a RUIM

A SX6P may be bonded to a specific RUIM. Once it has, the SX6P will not operate normally with
any other RUIM installed in it. It will reject incoming calls and permit only emergency outgoing calls.
The same holds true for any other SX6P the bonded RUIM is installed into: it will not operate nor-
mally.

To start a bonded SX6P, power it on. No additional steps are necessary provided that the correct
RUIM is inserted into the SX6P.

If you want to bond a SX6P to an RUIM, contact your service provider.

Phonecell

®

SX6P CDMA

5

User Manual

Advertising