Toastmaster TRC10TCT - Manual (Page 18)

No Indicator
Lights are
illuminated.
Water overflows
during cooking.
Make sure the Automatic Rice Cooker is plugged
in.
Check between the Cooking Pot and heating
plate for any foreign substances. Be sure the area
is clean.
Make sure the Cooking Pot is in the Main
Housing.
Before adding rice, make sure you don’t fill
above top water level.
Make sure Glass Lid is in place and steam hole is
clean before cooking.
Cooked rice is
too dry or not
completely
cooked.
Before cooking, make sure you put enough water
in for the total amount of rice included.
After cooking, add 1/4 cup water and set on
WARM cooking cycle for 10-15 minutes. Stir.
Check between the Cooking Pot and heating
plate for any foreign substances. Be sure the area
is clean.
Be sure to stir the cooked rice/grain as soon as
cooking is done. Otherwise, they will clump and
become hard on top.
Cooked rice is
too watery.
Before cooking, make sure you don’t add too
much water for the amount of rice.
Check between the Cooking Pot and heating
plate for any foreign substances. Be sure the
area is clean.
Make sure the cooking cycle is not interrupted.
If the power cord is unplugged, the unit will not
operate and the rice will not cook.
Allow rice to stand for approximately 15 minutes,
covered, on WARM before serving.
Symptom Possible Solutions
Trouble Shooting
17.