Toshiba TEC EM1-33046A - Manual (Page 10)

2. SPECIFICATIONS EM1-33046A
2.2 OPTIONS
2.1.4 Communications Interface
Communications: RS-232C (DB-9) at 2400, 4800, 9600 or 19200 baud
Character Set: ANSI ASCII character set
Word Length: 7 or 8 data bits, 1 or 2 stop bits, selectable parity
Handshaking: XON/XOFF (on receive mode only) and CTS/DTR
Input Buffer: 2 K bytes
2.1.5 Electrical Parts
Input voltage: Switching power, 100~240 VAC
±
10%, single phase 50/60 Hz
Circuit Protection: 2A maximum
Grounding: Unit must be connected to a properly grounded receptacle
2.1.6 Environment
Operating Temperature: 5
°
C to 40
°
C
Storage Temperature: -10
°
C to 60
°
C
Humidity: 25% to 85%
2.1.7 Body
Size: 6.14 inches H x 9.13 inches W x 11.73 inches D (15.6 cm H x 23.2 cm W x 29.8 cm D);
with external roll mount 17.95 inches D (45.6 cm D)
Weight: 4.85 lb. (2.2 kg), and with external roll mount 5.38 lb. (2.45 kg)
2.2 OPTIONS
A number of different options may be added to the B-442 Bar Code Printer for even greater convenience
and versatility.
Option Name
Memory Module
Black Mark Sensor
Model No.
or Part No.
B-5704-EM-QM
Part No.
FMYH0013901
Description
Expandable RAM memory module
(384KB) with Date/Time clock.
Attaching this sensor to the printer alls
a detection of black marks on media.
Source
See Note 1
See Note 2
NOTES: 1. Contact TEC H.Q. or your nearest TEC representative.
2. Order from TEC Parts Center.
2-2
( )