Service & spare parts, Customer care, Symptom – Tricity Bendix BIW 85 User Manual

Page 21: Possible causes

Advertising
background image

21

If after the above checks, there is still a fault , call your
local Bendix Service Force Centre.

Service & Spare Parts

If you require an engineer or wish to purchase spare
parts contact your local Bendix Service Force Centre by
telephoning:

08705 929929

Your telephone call will be routed to the Service Force
Centre covering your post code area.

When you call the Service Force Centre please make
sure you give the model and serial number of the
appliance.

This information can be found on the rating plate (see
picture).

In-guarantee customers should ensure that the above
checks have been made as the engineer will make a
charge if the fault is not a mechanical or electrical
breakdown. Please note that proof of purchase is
required for any in-guarantee service calls.

Mod. ..........
Prod. No. ...........

Ser. No. .........

Mod.
..........

Ser.

P0042

Symptom

The door will not open

Possible causes

The programme is still running.

The door lock has not yet released

The water level in the drum is too high or the machine is heating.

Spinning starts late or the machine
does not spin

The electronic unbalance detection device has cut in because the
laundry is not evenly distributed in the drum. The laundry is
redistributed by reverse rotation of the drum. This may happen several
times before the load is evenly distributed and spinning can resume
eventually at a lower speed. If the wash load is still not sufficiently
distributed, after 10 minutes, the machine will not spin. In this case,
redistribute the load manually and reselect the spin programme.

The machine makes an unusual
noise

The noise produced when spinning may differ from your previous
washing machine, which is due to the modern drive system. This new
motor ensures a softer start and more even distribution of the laundry in
the drum when spinning, as well as increased stability of the machine.

No water is visible in the drum

Machines based on modern technology operate very economically
using very little water without affecting performance.

Customer care

For general enquiries concerning your Bendix appliance
or for further information on Bendix products, please
contact our Customer Care Department by letter or
telephone as follows:

Customer Care Department

Bendix

55-77 High Street

Slough

Berkshire

SL1 1DZ

Tel 08705 950950 *

* Calls to this number may be recorded for training
purposes

Advertising