Tripp Lite SREXTENDER - Manual (Page 6)

6
N
L
O
O
48/42U
2-5
2-6
2-7
2-8
2 – Frame Attachment
(continued)
Use two M6 x 12 mm screws and washers
L to connect the
included grounding cable N
from the rack enclosure to the
extension frame.
Reverse step 2-2 to attach the rear doors to the extension frame.
Attach the grounding cable of each rear door to the grounding
points of the extension frame as shown. (Use the screws and
washers removed in step 2-1.)
(For 25U enclosures, skip this step.) Use four M5 x 20 mm
screws and washers
O to secure the frame to the rear of the rack
enclosure.
2-5
2-6
2-7
2-8