Uniden UH089 - Manual (Page 7)

Turn the Unit ON by rotating the
volume control clockwise. Turn the
outer ring of the control to adjust the
Squelch.
Setting the FM Squelch
Strong Signals
Medium Signals
Weak Signals
Noise
Think of the squelch control as a
gate. If you turn Squelch fully
clockwise it raises the ‘Squelch
Gate’ so high that no signals get
through.
Strong Signals
Medium Signals
Weak Signals
Noise
Strong Signals
Medium Signals
Weak Signals
Noise
If you turn Squelch fully
counterclockwise it lowers the
‘Squelch Gate’ to the extent that
all signals get through - weak,
medium and strong signals and
noise.
To set the ‘Squelch Gate’ to the
desired level, turn the squelch knob
counterclockwise until you hear
noise. Then carefully turn the
Squelch knob clockwise until the
noise fades. Now only strong
signals get through.
UNIDEN Model UH-089 FRS CB Radio
Operation
6
Press the MONI button on the microphone to open the squelch and receive all
weak signals. Press and hold the MONI button for 3 seconds to hold the squelch
open. Press MONI again momentarily to cancel.
Monitor
MONI
SQ
VOL
Rotary
Channel
Selector
SLCT SCAN MEM INST DUP
S/RF VOL
CTCSS DUAL
OS/GS
INST SET STORE
FM
You must select a
channel which is not
in use before setting
the SQUELCH control.
(see p.7)
NOTE