Rf attenuation feature 21, Rf attenuation feature – Uniden BC245XLT User Manual
Page 25
If you want to stop on
a channel during
scanning, press
.
If you want to resume
scanning, press
.
To directly access a specific channel:
1.
Press
.
2.
Enter the channel
number you want
using the keypad.
3.
Press
again.
RF Attenuation Feature
The BC 245XLT comes with an RF Attenuation feature. If
you’re near an unusually strong signal source, the signal
may overload the scanner. The scanner may stop
repeatedly on that signal and miss other transmissions.
The RF Attenuation feature works in all modes and
attenuates (reduces) the incoming signal strength by about
15 dB, preventing stronger signals from overloading the
scanner.
To turn RF Attenuation on:
1.
Press ATT.
21
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
C:\Manuals\BC245XLT\BC245XLT.VP
Tue Jun 15 11:02:02 1999
Color profile: Disabled
Composite Default screen