Scanning 20 – Uniden BC245XLT User Manual
Page 69
6.
If the connection is
successful, the
scanner starts
frequency
downloading.
7.
donE will be
displayed when your
downloading is
completed.
8.
To start the scanner,
you must turn the unit
off/on.
If downloading is not successful, one of the following error
messages will appear.
Err01: MODEM ACCESS ERROR
Err02: NO CARRIER
Err03: TELEPHONE LINE BUSY
Err04: NO ANSWER
Err05: SERVER CONNECT ERROR
Err06: DATA IDLE TIME OUT
NOTE: If the scanner does not display LoAd (see
step 6), disconnect the access by pressing
.
Then, make sure the modem is connected
properly, and try again.
NOTE: The number preprogrammed into your scanner
for downloading frequencies is 1-900-225-4822.
There is a $0.99 per minute charge for using the
SmartScan database.
The frequencies in the SmartScan database are
updated, at a minimum, every 6 to 12 months. To
get current frequencies, as well as
special /sporting event frequencies, regularly
update your scanner by using SmartScan.
NOTE: If you are unable to dial a “900” number, check
with your local phone company to find out if you
have a “900” block on your phone line. This will
prevent you from dialing to the server.
65
C:\Manuals\BC245XLT\BC245XLT.VP
Tue Jun 15 11:05:13 1999
Color profile: Disabled
Composite Default screen