Ulead KDC330 - Manual (Page 32)

63 62
� Switch on the camera.
� Connect the camera to the USB port of a PC.
� When the camera is connected to the PC, the camera is
converted to PC connection mode. Then, the USB Mass
Storage Driver of the camera is automatically installed in the
operation system of the PC. Thus, you may use it
immediately.selection of the pictures taken.
� Open "Windows Search" to look into the contents of the
camera.
� In the Windows Search, the
portable disk drive is
connected as in the Figure.
This driver is connected to
the Compact Flash card of
the camera. The pictures
saved in the card can be
copied through a PC, or the
pictures from the PC can be
copied to the card of the
camera.
� The portable disk provides the function of hard disk of a PC.
Therefore, you may use it as you use general disks.
Installing Bundle Software
Installing Ulead Photo Express 4.0SE
� When you insert the bundle CD in the CD-ROM drive, the
following installation image is executed
� Click Installation Photo Express. You see the following
installation wizard. Click N (Next)
11. Application Software Description of the Function of USB Mass Storage