Unibrain 501 - Manual (Page 74)

Unibrain Fire-i 501/511/601/701/702/810 Operation Manual Page 66
(1: 0xF2F1015C command enable, 0: no operation)
Bit 8 : Gain/Shutter table access ready (read only: 1: ready, 0: not ready)
Bit 10 : Gain/Shutter table save command (self cleared)
Bit 11 : Gain/Shutter table load command (self cleared)
Bit12 ~ Bit15 : Gain/Shutter table save/load index
Bit 24 ~ Bit 31: Gain/Shutter table frame read start address
0xF2F1015C
Trigger mode 12/13 Gain/Shutter value register
Bit 0 ~7: Gain/Shutter index table address
Bit 8 : Gain/Shutter increment ( 1: increment, 0: next frame have the same
gain/shutter value
Bit 9 ~ 19 : Gain value
Bit 20 ~ Bit31 : Shutter value
At read operation, read address is Trigger mode 12/13 Gain/Shutter Control
register bit 24~ bit 31, and after read, Trigger mode 12/13 Gain/Shutter
Control register bit 24~ bit 31 is automatically increment.
Read/Write
*msb: most significant bit
Address Description ( bit 0 : MSB) Read/Write
0xF2F10128
Defer Image control (Frame save)
Bit 0 : presence inquiry (read only)
Bit 6 : defer image On/Off control
( 1: image hold mode, 0 : normal real time mode)
Bit 7 : send image command:
If bit 6 is on status, this bit is send image command from camera to PC.
Bit 16 ~ Bit 23: Queue size inquiry : Must check whenever format or mode is
changed (read only)
Bit 24 ~ Bit 31: At read operation, this value is the number of images remaining in
queue.
At write operation, this value is the number of sending images by bit 7 send image
command
Read/Write
0xF2F1012C
4 step knee LUT run control register
LUT knee 1st point register
Bit 0 : presence inquiry (read only)
Bit 1 : LUT regeneration command (self cleared)
Bit 2~Bit4 : reserved
Bit 5 : enable brightness, sharpness, gamma feature with knee function
Bit 6 : On/Off
Bit 7 : reserved
Bit 8~Bit 19 : X coordination of 1st knee point
Bit 20~Bit31 : Y coordination of 1st knee point
Read only
0xF2F10130
LUT knee 2nd point register
Bit 0 : presence inquiry (read only)
Bit 1 : LUT regeneration command (self cleared)
Bit 2~Bit5 : reserved
Bit 6 : reserved
Bit 7 : reserved
Bit 8~Bit 19 : X coordination of 2nd knee point
Bit 20~Bit31 : Y coordination of 2nd knee point
Read/Write
0xF2F10134
LUT knee 3rd point register
Bit 0 : presence inquiry (read only)
Read/Write