Uniden BT-1018 - Manual (Page 4)

4
Important Information

Because the handset adapts to the base, the exact features and operation of the
handset will vary slightly depending on which base you register the handset to.
Refer to the user guide for the base you're registering the handset to for feature
descriptions.

All features and operation for the handset are described in the user's guide for
one of the bases listed under the Compatible Bases section.

User guides for all Uniden phones are available on our website for free
downloading.
Specifications
AC Adapter
Part number Input Voltage Output Voltage
PS-0035 120V AC, 60 Hz 8V AC @ 300mA
Battery pack
Part number Capacity
BT-1018 500mAh, 2.4V DC

Use only the supplied AC adapters.

Be sure to use the proper adapter for the base and any chargers.

Do not place the power cord where it creates a trip hazard or where it could
become chafed & create a fire or electrical hazard.

Do not place the unit in direct sunlight or subject it to high temperatures.
Battery Information

Fully charged, the battery should provide about 10 hours of talk time and about 7
days of standby time. For best results, return the handset to the cradle after each
call to keep it fully charged.

Keep an eye on the battery status icon. When the battery gets too low, the
handset shows a low battery alert. If you hear a strange beep during a call, check
the display: if you see the low battery alert, finish your conversation as quickly as
possible and return the handset to the cradle. If the handset is in standby, none of
the keys will operate.

With normal use, the battery should last about one year. Replace the battery
when the talk time becomes short even when the battery is charged. To buy a
replacement battery, call the Parts Department listed on the front cover.