Unigreen Trolleys and Barrows User Manual

Page 22

Advertising
background image

22

23

6.2 ROUTINE MAINTENANCE

Follow the instructions in the “Switching off” section and in the table below.

For appliances fitted with a combustion engine, remember to follow the instructions for routine

maintenance in the engine’s operating and maintenance instructions, especially as regards

controlling the engine oil, the air filter and the spark plug.

WARNING

• During use, the appliance should not be too noisy and large amounts of liquid or oil should

not drip from underneath it.

In this event, a Skilled Technician should test the appliance.

6.2.1 Diaphragm rupture
The rupture of one or more diaphragms can result in the mechanical parts of the pump being

damaged by the liquids being pumped.

The following are symptoms of possible diaphragm rupture:

- oil takes on a whitish appearance (symptom of water in the oil)

- excessive consumption of oil

- sudden lack of oil in the volumetric compensator (32).

WARNING

• To avoid the negative consequences of this malfunction, stop operation of the appliance

immediately and contact a Skilled Technician without delay (within 24 hours) who will

take the necessary action.

If it is not possible to contact a Skilled Technician within the above time in case of

ACTION

Each time used

Every 50 hours

INTERVAL FOR MAINTENANCE

Oil or lubricate rotating or sliding parts that are

easily accessible for the operator.

Check the inflation pressure of the pressure

accumulator (if any) and tyres.

Check the intake circuit.

Check the motor-driven pump is securely

fastened to the appliance’s structure.

Should the motor-driven pump appear not to

secure, do not use the appliance and

contact a Skilled Technician.

Check level and status of pump oil

Check the intake filter, filling filter, and

nozzleand clean, if necessary. Do not use hard

or sharpobjects to clean the nozzle.

Check the supply cable, high-pressure

hoseand spray lance, that the grips and

couplings are secure and that any hooks (34)

on the controlunit are inserted correctly.

Should any of these parts appear to

bedamaged, do not use the appliance and

contact a Skilled Technician.

Advertising