Part one, Ntroduction – Unigreen Trolleys and Barrows User Manual

Page 9

Advertising
background image

8

9

I

NTRODUCTION

This manual is divided into two separate sections.

The first is for use by the end user and the Skilled Technician; the second is for use by the Skilled

Technician alone.

Skilled Technician means a person, generally employed by the service centre, who has received

appropriate training and is authorised to carry out special maintenance and repairs on the appliance

(the term “appliance” is used to indicate both trolleys and barrows). Any work on electrical parts

must be carried out by a Skilled Technician who is also a Qualified Electrician, i.e. a person

with professional training who is authorised to check, install and repair electrical equipment

correctly and according to the current regulations in the country where the appliance is installed.

CAUTION

• The appliances are supplied in a kit and must be assembled; the motor-driven pump

(operated by an electric motor or combustion engine) must be the type recommended by the

Manufacturer. Other types of motor-driven pumps must not be used unless prior authorisation

is granted by the Manufacturer.

• The kits must be assembled and the motor-driven pump must be installed by a Skilled

Technician according to the instructions contained in part two of these instructions.

The Declaration of Conformity contained at the end of this section in the instructions is

only guaranteed if the above requisites are met.

PART ONE

1. GENERAL INFORMATION

Congratulations for choosing one of our products! We would like to remind you that we took the

safety of the operator, the efficiency of its use and the protection of the environment into great

consideration when designing and manufacturing this product.

In order to preserve its features over time, please read and follow these instructions carefully.

Particular attention must be awarded to the parts with the following symbol:

CAUTION

as they contain important instructions regarding safety when using the appliance.

The Manufacturer is not liable for damage caused by:

failure to comply with these instructions and the instructions for the combustion engine, if

any, used with the appliance;

use of the appliance not included in the list in the “DESIGNATED USE” section;

failure to comply with current safety regulations and regulations for the prevention of

accidents in the workplace when using the appliance;

tampering with the safety devices and devices limiting the maximum operating pressure

incorrect installation

failure to carry out the required maintenance;

modifications or actions without prior authorisation by the Manufacturer;

use of non-original or non-specific spare parts or accessories for this model of appliance;

repairs which were not carried out by a Skilled Technician.

1.1 TERMS OF THE GUARANTEE

The guarantee is valid for a period of 24 months from the date on the sales document (receipt,

invoice etc.) provided the guarantee certificate included with the appliance’s documents was sent

Advertising