Uniden BC248CLT - Manual (Page 27)

24
3. Press ▼ or ▲ to set the desired frequency.
The channel number flashes. Continue to
press
▼ or ▲ to step through the
frequencies in 100kHz steps. Or, press and
hold
▼ or ▲ to step through the
frequencies more quickly until 92.5000MHz
appears in the display.
4. Press E to complete the entry. The channel
digits stop flashing.
5. Adjust the VOLUME control to a comfortable
comfortable listening level.
Continue to program your favorite radio stations in the other nine FM channels using the above
example.
To program the ten AM channels, press RADIO AM/FM to select the AM Mode. The AM icon
appears in the display. Then repeat Steps 2. through5. You will step through the frequencies in
10kHz steps.
To change a programmed Radio Frequency, repeat the steps above using the new frequencies.
BC248clt.qxd 3/8/00 7:19 PM Page 24