Uniden BC248CLT - Manual (Page 33)

30
Set Alarm to Radio Mode
Before you set the Radio Alarm, make sure the AM or FM channel is selected and the VOLUME
control is set to the desired level.
The scanner must be turned off (Clock Mode), to be woken up by the radio alarm.
1. Press OFF.
2. Press and hold ALARM for more
than 2 seconds. When the alarm is
on, the ALARM and RADIO icons
flash for 5 seconds.
3. The ALARM remains on.
When the alarm goes off, it will play the radio station that was previously selected. The alarm will
continue for approximztely 15 minutes, if no action is taken.
Snooze function
To silence the alarm, simply press any key. This silences the alarm for about nine minutes. You can
repeat this cycle for over an hour.
Turn the Alarm Off
Press ALARM to turn the alarm off.
When the alarm is off, the ALARM icon
and current alarm time are no longer
displayed, only the current time is
displayed.
BC248clt.qxd 3/8/00 7:19 PM Page 30