Uniden GNS8365BT User Manual

Page 59

Advertising
background image

This semi-transparent icon is displayed if GPS position is available, and the map has

been moved. It also appears when you scale or tilt the map while Smart Zoom is

enabled.

This semi-transparent icon is displayed if GPS position is available, and the map has

been moved or rotated. It also appears when you scale or tilt the map while Smart

Zoom is enabled.

Normally iGO positions the map to keep the GPS position visible somewhere on the

map (when North-up orientation is selected), or always at the bottom centre of the

map (when Track-up orientation is selected).

If you manually move the map, it will freeze the map in the new position. To return to

the GPS position, use this Lock button.

Rotating the map in any direction will only freeze the orientation of the map, but it

keeps on moving to keep the GPS position visible. Use Lock to return to North-up or

Track-up orientation (the one previously selected).

Scaling or tilting the map also stops the automatic zooming or automatic tilting

respectively. To reactivate Smart Zoom, tap this button.

When Smart Zoom is enabled, scaling or tilting the map also stops the automatic

zooming or automatic tilting respectively. To reactivate Smart Zoom, tap this button.

This button has a hardware button equivalent: Page 㡺⮮

! 㺛Ṟ䞒Ṗ 㩫㦮♮㠊 㧞㰖

㞠㔋┞┺

..

Tip: In Advanced settings you can set a delay time after which iGO pushes the Lock

button for you automatically (Page

). This can be turned on for re-enabling both

Lock-to-Position and Smart Zoom.

68

4.5.5 Cursor (No. 7)

As described earlier (Page

), if you tap the map somewhere or select one specific

item in Find, it will become the selected point on the map, marked with a small red

dot and radiating red circles to make it conspicuous. You can use this point as

starting point, via point or destination for your route, you can search for a POI near it,

mark it with a pin, or save it as a POI.

23

4.5.6 Map scale (No. 8)

The scale indicator is only available on the Map screen. In 2D map view it represents

the scale of the map. In 3D view it is the scale of the nearest part of the map only.

31

GNS

GNS

please see seperate operation manual.

Advertising