Uniden GNS8365BT - Manual (Page 94)

5.6.1.4 Coordinate display format
Positions are sometimes displayed with their addresses, and sometimes with their
coordinates. This setting lets you choose between displaying coordinates in degrees
(dd.dddddd); degrees and minutes (dd mm.mmm); or degrees, minutes and seconds
(dd mm ss.s).
Note: the coordinate display mode is independent from the coordinate input in Find
menu. You can use all three formats freely on the coordinate input screen.
5.6.1.5 Cockpit screen layout
There are three route data fields at the bottom of the portrait Cockpit screen, or on
the left of the landscape Cockpit screen.
There are three route data fields at the bottom of the Cockpit screen.
There are three route data fields on the left of the Cockpit screen.
Their content is fixed in Cruise mode (when there is no active route), but for
Navigation mode you can change their content on this screen. The available values
are listed here: Page . 36
5.6.2 Backlight settings
5.7 Screen settings
Here you can set how the display backlight behaves when using iGO. These settings
are independent of the settings of the other applications of Car Point PND.
5.7.1.1 Power management
5.7.2 Power management
At the top of the screen you can set how the backlight will behave when the screen
has not been touched for a while.
Backlight always on
66
GNS